Smart2Pure and TKA Smart2Pure 12
This is the password for converting normal tap water to ultrapure water of ASTM Types I and II. All in one! Smart2Pure is a compact complete syste...
Type II Water Purification System
LabTower EDI
Two in One!
Pure and Ultrapure water.
High purity water quality 15 – 10 MΩ×cm.
The complete system in midi-format.
For daily needs of 100 to 500 litres.
For example, for
- Rinsing lab glassware
- Supplying autoclaves, clinical analysers
and ultrapure water systems - Preparing and diluting buffers reagents
tissue culture media - Sample preparation for analytical methods
- General biotechnology applications
Ultrapure Water ASTM type I, 18.2 MΩ×cm.
TOC 1 – 5 ppb
Direct dispensing of Ultrapure water.
Even for the most demanding and sensitive
applications.
In the Biosciences
- For molecular biology and microbiology work
- In the preparation of cell and tissue cultures
- In PCR, DNA sequencing
- Electrophoresis
In Analytical Chemistry
- Organic and inorganic trace analysis
- HPLC
- GC-MS, ICP-MS, GF-AAS
- TOC Measurements, IC
In Routine Laboratory Work
- Analytical procedures
- IC, AAS, ICP-ES
Standards
The TKA LabTower EDI exceeds the standards
ASTM type I and type II, CAP, ISO 3696, BS 3997, CLSI.
The benefits in a nutshell!
Two in one!
- Reverse osmosis + EDI water purification
and high purity water tank - Two systems, but only one unit
- One on top of the other instead of alongside
- Perfectly tuned to each other
- Formally a unified whole
Two ways to draw water!
- Directly from the system via a dispensing tap
with sterile filter (ASTM I) - From the tank for direct supplying of autoclaves,
analysers, washing machines (ASTM II)
Built-in state-of-the-art techniques!
- Water pretreatment with activated carbon/prefilter
and hardness stabiliser - Pressure pump for direct supply to autoclaves,
analysers, washing machines
Safe operation!
- Microprocessor control for automatic operation
- Permanent monitoring of all important parameters
- Automatic return to the operating mode after
operating actions - Potential-free contact for fault messages
Highest hygiene security!
- Automatic recirculation of the water in the tank
across a special polisher module - Protection against bacterial growth even on long
standstills
Stock high purity water safely and conveniently!
100 Litre tank module!
- Up to 100 l water on call
Sterile vent filter/tank overflow
- Two safety filters prevent internal contamination
by microorganisms from the surrounding air - Option: CO2 absorber that prevents increased
TOC value by drawn-in CO
Volume display/Float chain
- Fully automatic level regulation for percentage
volume display of the tank content - Float chain with adjustable volume content
Recirculation pump
- Serves to protect the high purity water from
bacterial growth during standstill and safeguards
the low conductivity value
Polyethylene tank
- High purity water resistant, opaque and food-safe
|
Tank level control indicator!
|
|
LabTower EDI. Water purification with High-Tech.
Combination of electrodialysis and ion exchange processes.
Electrodeionisation, EDI in brief, unites two proven technologies for producing
ultrapure water: Electrodialysis and ion exchange (IEX). The great technical thing
about this: In contrast to conventional ion exchange, in which resins must be
chemically regenerated, EDI utilizes an electric current for continual resin
regeneration.
System components LabTower EDI
|
Type LabTower
|
EDI 15 | EDI 30 | |
| ASTM I Conductivity in µS/cm | 0.055 | ||
| Resistivity in MΩxcm at 25° C: | 18.2 | ||
| Flow rate up to l/min: | 2 | ||
| TOC value in ppb | 5 – 10 | ||
| TOC value in ppb with optional UV photooxidation |
1 – 5 | ||
| Bacterial level in CFU/ml with sterile filter |
< 1 | ||
| Particles (> 0.2 µm/ml) with sterile filter |
< 1 | ||
| Optional with ultrafilter: retention of endotoxins, RNases, DNases |
Yes | ||
| ASTM II Conductivity in µS/cm* | 0.067 –0.10 | ||
| Typical resistivity in MΩxcm*: | 15 - 10 | ||
| Pure water production at 15 °C, l/h: | 15 | 30 | |
| Silicate removal, %: | > 99,9 | ||
| TOC value, ppb*: | < 30 | ||
| Operating pressure in bar, min./max.: | 2/6 | ||
| Supply voltage: | 230 V/50Hz | ||
| Power consumption kW: | 0,25 | ||
| Feedwater connector: | d8 / R 3/4” | ||
| Ambient temperature: | +2 °C - +35 °C | ||
| Dimensions W x D x H in mm: | 450 x 580 x 1500 | 450 x 580 x 1500 | 450 x 580 x 1500 |
| Weight in kg: | 58 | 58 | |
| Article-No.: | 07.4415 | 07.4430 |
* with < 30 ppm CO2 in the feedwater
